AAF® 80055.011010 Extended Surface Low Pressure Drop Pleated Standard Capacity Air Filter, 10 in H x 10 in W x 1 in D, 8 MERV, 180 deg F
AAF® 80055.011010 Extended Surface Low Pressure Drop Pleated Standard Capacity Air Filter, 10 in H x 10 in W x 1 in D, 8 MERV, 180 deg F
AAF® Flanders® PREpleat® LPD SC filter is a high strength supported MERV eight pleated filter which pair low initial resistance with high dust holding capacity which combine to provide an extended life cycle and energy efficient performance.
AAF® PREpleat® Air Filter, Extended Surface Low Pressure Drop Pleated Standard Capacity, Series: 80055, 10 in Width, 1 in Depth, 10 in Height, 8 MERV, 208 cfm Flow Rate, 180 deg F, Beverage Board Frame, 30 to 35 % Efficiency, 0.17 in-WG Initial Resistance, 1 in-WG Final Resistance, Synthetic Media, 9-1/2 in W x 3/4 in D x 9-1/2 in H Actual Overall
Features
- Lowest initial resistance MERV eight pleated filter
- Higher dust holding capacity than competitive high capacity filter deliver longer life and more energy efficient performance
- Superior strength due to two piece die cut frame with diagonal and horizonal support member and wire backed media
- Expanded metal grid maintain pleat shape during operation for full media utilization and high dust holding capacity
- Filter media bonded to the frame at all points of contact to eliminate dirty air bypass
- 100% synthetic non-woven, proprietary media
- Engineered with a gradient density composition that achieve a MERV eight rating using the mechanical method of particle capture
- Media does not rely on an electrostatic charge to capture particulate and will only increase in efficiency over time
- Expanded metal is continuously laminated on the air leaving side to provide pleat stability during operation
- Pleat shape is maintained, allowing full media utilization and maximizing dust holding capacity
- V-pleat design aids in pressure drop while reducing energy cost
- Design allow for maximum airflow and dust holding capacity during the life of the filter
- Heavy duty, two piece, moisture-resistant frame include diagonal and horizontal support member bonded to the media on the air entering and exiting side for unsurpassed frame strength
- Interlocking corner and positive media to frame seal reduce the possibility of air bypass
Specifications
AAF® Flanders® PREpleat® LPD SC filter is a high strength supported MERV eight pleated filter which pair low initial resistance with high dust holding capacity which combine to provide an extended life cycle and energy efficient performance.
AAF® PREpleat® Air Filter, Extended Surface Low Pressure Drop Pleated Standard Capacity, Series: 80055, 10 in Width, 1 in Depth, 10 in Height, 8 MERV, 208 cfm Flow Rate, 180 deg F, Beverage Board Frame, 30 to 35 % Efficiency, 0.17 in-WG Initial Resistance, 1 in-WG Final Resistance, Synthetic Media, 9-1/2 in W x 3/4 in D x 9-1/2 in H Actual Overall