Polywater® G-128 Type G Single Polymer Cable Pulling Lubricant, 1 gal Jug, Gel Form, Transparent, 0.98
Polywater® G-128 Type G Single Polymer Cable Pulling Lubricant, 1 gal Jug, Gel Form, Transparent, 0.98
Polywater® G offers crews a cable pulling lubricant that can be hand applied when pouring is not possible. Polywater® G is a single polymer lubricant used for underground cable pulling in the telecommunication and electrical utility industries. This non-staining lubricant was widely used 30-40 years ago due to its ease of application, resistance to mold growth, and availability in-field friendly packages. Polywater® newer complex polymer lubricants, such as Polywater® J, are better suited for installing copper telecommunication and electrical cables. Polywater® J was specially formulated for today's longer and more difficult pulls, pulling through multiple bends and working in hot environments. Polywater® J is also used in vertical conduit runs, as it won't cold flow down into the box or panel after the cables are installed. If Polywater® G is still being used we recommend contacting American Polywater® for a better solution for cable installation needs.
Polywater® Cable Pulling Lubricant, Type G Single Polymer, Jug, 1 gal, Water Base, Gel, Transparent, 40 to 100 deg F, 0.98 Specific Gravity, 6.5 to 8 pH, 10 g/L VOC, 40000 to 80000 cPs Viscosity
Features
- Less mess clean drying, non-staining and water soluble
- Can be hand applied, pumped
- Low solids will not cement-in cables
- Evaporates after use nothing to soil hands or pollute environment
- Temperature stable will not separate when frozen or kept in hot environments
- Compatible with most cables, including polyethylene jackets
- Proven effectiveness through decades of worldwide use
- Good friction reducing properties
Specifications
Polywater® G offers crews a cable pulling lubricant that can be hand applied when pouring is not possible. Polywater® G is a single polymer lubricant used for underground cable pulling in the telecommunication and electrical utility industries. This non-staining lubricant was widely used 30-40 years ago due to its ease of application, resistance to mold growth, and availability in-field friendly packages. Polywater® newer complex polymer lubricants, such as Polywater® J, are better suited for installing copper telecommunication and electrical cables. Polywater® J was specially formulated for today's longer and more difficult pulls, pulling through multiple bends and working in hot environments. Polywater® J is also used in vertical conduit runs, as it won't cold flow down into the box or panel after the cables are installed. If Polywater® G is still being used we recommend contacting American Polywater® for a better solution for cable installation needs.
Polywater® Cable Pulling Lubricant, Type G Single Polymer, Jug, 1 gal, Water Base, Gel, Transparent, 40 to 100 deg F, 0.98 Specific Gravity, 6.5 to 8 pH, 10 g/L VOC, 40000 to 80000 cPs Viscosity
Resources