Polywater® Polywater® WJ WJ-35 Type WJ Cable Pulling Lubricant, 1 qt Bottle, Stringy Gel Form, Cream, 1.01
Polywater® Polywater® WJ WJ-35 Type WJ Cable Pulling Lubricant, 1 qt Bottle, Stringy Gel Form, Cream, 1.01
Polywater® lubricant J is a high performance, clean, slow drying, water based gel lubricant. Lubricant J provides maximum tension reduction in all types of cable pulling. It is specially recommended for long pulls, multiple bend pulls and pulls in a hot environment. Lubricant J dries to form a thin lubricating film that retains its lubricity for months after use. Polywater® lubricant J is a specification grade lubricant that does not promote flame propagation when used with fire retardant cables and systems. It is harmless to humans, environmentally safe, compatible with common cable jacket materials and can be easily applied by hand, by pump or by use of the unique Polywater® front end Pack™ system.
Polywater® Polywater® WJ Cable Pulling Lubricant, Type WJ, Bottle, 1 qt, Water Base, Composition: Propylene Glycol, Stringy Gel, Cream, -20 to 120 deg F, 1.01 Specific Gravity, 7.5 to 9 pH, 200 g/L VOC, 25000 to 40000 cPs Viscosity, Winter/Specification Grade
Features
- Maximum friction reduction for low cable pulling tension
- Clean and non-staining minimizes clean up time
- High cling factor stays on cable jacket during application
- Field friendly application can be pumped, hand applied or distributed by front end Pack™
- Temperature stable no ruined lubricant from freeze/thaw or high temperature exposure
- Non-combustible residue
- The most used and specified cable lubricant
- High performance, clean, slow drying, water based, gel lubricant, non-staining, field friendly packaging, temperature stable, high cling factor
Specifications
Polywater® lubricant J is a high performance, clean, slow drying, water based gel lubricant. Lubricant J provides maximum tension reduction in all types of cable pulling. It is specially recommended for long pulls, multiple bend pulls and pulls in a hot environment. Lubricant J dries to form a thin lubricating film that retains its lubricity for months after use. Polywater® lubricant J is a specification grade lubricant that does not promote flame propagation when used with fire retardant cables and systems. It is harmless to humans, environmentally safe, compatible with common cable jacket materials and can be easily applied by hand, by pump or by use of the unique Polywater® front end Pack™ system.
Polywater® Polywater® WJ Cable Pulling Lubricant, Type WJ, Bottle, 1 qt, Water Base, Composition: Propylene Glycol, Stringy Gel, Cream, -20 to 120 deg F, 1.01 Specific Gravity, 7.5 to 9 pH, 200 g/L VOC, 25000 to 40000 cPs Viscosity, Winter/Specification Grade
Resources