Loctite® 2096064 Anaerobic Medium Strength Eliminator Gasket Sealant, 50 mL Container Tube Container
Loctite® 2096064 Anaerobic Medium Strength Eliminator Gasket Sealant, 50 mL Container Tube Container
LOCTITE® 518™ is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE® 518™ cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
Loctite®, 2096064, Eliminator Gasket Sealant, Anaerobic Medium Strength, Tube Container, 50 mL Container, Dimethacrylate Ester Chemical, 25 min Setting, 4 hr Curing, Red, -65 to 300 deg F, 1.1 Specific Gravity, 4.28 g/L VOC, Adheres to: Gaskets, Metal Threads, Steel and Brass, Fittings, Pipes, Valves, Gauges, Refrigerant Systems, Stem
Features
- Semi-flexible, medium-strength anaerobic flange gasket
- Easy to automate
- Reduces process costs - eliminates manual assembly of conventional gaskets
- For active and inactive rigid metal flanges
- Cures through minor surface contamination
- Adapts to flange surface irregularities and gaps up to 0.25 mm
- Gel-type consistency
- Seals instantly against low pressure
- Reduces inventory costs - no need for large inventory of cut gaskets
- Resists high pressure when fully cured
- No compression set or misaligned gaskets
Specifications
LOCTITE® 518™ is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE® 518™ cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
Loctite®, 2096064, Eliminator Gasket Sealant, Anaerobic Medium Strength, Tube Container, 50 mL Container, Dimethacrylate Ester Chemical, 25 min Setting, 4 hr Curing, Red, -65 to 300 deg F, 1.1 Specific Gravity, 4.28 g/L VOC, Adheres to: Gaskets, Metal Threads, Steel and Brass, Fittings, Pipes, Valves, Gauges, Refrigerant Systems, Stem
Resources